Thomas Monitor Systems becomes Citodent Imaging

On November 25, 2019, the legal form of Thomas Monitor Systems was converted into a private company. From that moment the official name has been changed to Citodent Imaging BV.

Our address and bank account number remain unchanged.

The name and the branding of VisiQuick will remain as it always was!

Our new company data:

Chamber of Commerce: 76510220
VAT: NL860651290B01

Suksess når bilde behandlings programmet VisiQuick ble lansert i Akershus

VisiQuick er et bildebehandlingsprogram som gir brukeren full frihet til å velge bildekilde og journalprogram.

Akershus Fylkeskommune er fulle av lovord når de nå for alvor har kommet i gang med å bruke programvaren VisiQuick i alle sine klinikker. Etter evalueringsmøtet er konklusjonen klar: Prosjektet har vært en suksess, og prosjektgruppa har levert på tid, pris, til avtalt kvalitet og helt uten nedetid for sluttbruker!
Hele 2,5 millioner bilder og 245 000 pasienter fordelt på 22 klinikker måtte konverteres når VisiQuick skulle tas i bruk for hele fylkeskommunen. Siden programvaren ble tatt i bruk i slutten av mai har det blitt tatt omtrent 1000 bilder om dagen. Tilbakemeldingen vi har fått fra Akershus er at de er svært fornøyde og at gruppa som har blitt lært opp til support får få henvendelser.

Vi i Dental Sør gleder oss stort over at dette prosjektet er kommet i mål. Prosessen har omfattet alt fra forprosjekt, tilpassing og implementering, til produksjon og opplæring.

Som programvare er VisiQuick veldig allsidig, og kan samle alle kjente bildekilder på én plass. I praksis vil dette si at klinikker som har vært vant til å bruke flere forskjellige programmer når de henter opp bilder fra for eksempel OPG eller intraoralt kamera vil dette samles i VisiQuick. Programmet har også en rekke andre nyttige funksjoner.

Vi har også fått en tilbakemelding fra Piet Reijers som jobber i VisiQuick. Han har vært aktiv i prosessen og kan fortelle om en oppstart som har gått tilnærmet knirkefritt. Ingen store problemer har oppstått, og de små som kom har oppstått på grunn av konfigurasjonsfeil lokalt.

“Jeg vil på vegne av hele VisiQuick uttrykke min respekt og takknemlighet til Dental Sør for å være en så lojal og dedikert partner. Sammen får vil det til å funke!”
-Piet Reijers

Er du interessert i programvaren VisiQuick, eller generelt bare vil vite litt mer om den? Ta kontakt med Rickard Haltnes. I tillegg har vi lansert kurskvelder hvor vi inviterer deg til å bli kjent med programmet og se om det kan være interessant for deg og din klinikk. Kurset er selvfølgelig gratis, og vi setter stadig opp nye kurssteder. Følg med på vår kurs og aktivitetskalender for å melde deg på.

VisiQuick 4 available for MSSQL database

VisiQuick 4 build 819 is available. This version can work with the classic Paradox database but also with a MSSQL full version database.

Later this year another variant of VisiQuick will be launched: VisiQuick Extended. This includes the following functions:

  • User Roles (linked to Active Directory or Administration system): allows the functions and possibilities within VisiQuick to be assigned to specific user groups.
  • Central configuration and management of X-ray equipment: for practices with multiple locations.
  • Worklist X-ray (Dicom, modality worklist): queue per location or clinic to make X-ray images.

New release VisiQuick 3 build 819

From now on VisiQuick 3 build 810 has been succeeded by VisiQuick 3 build 819. Changes included: expanding the number of X-ray devices supported for working in the cloud.

Here the full release notes.

DentalEyepad works with VisiQuick

The DentalEyepad camera has recently appeared on the market. This digital camera has its own built-in workflow and the photos can be automatically added to the patient card in VisiQuick.

The installation is easyly done by yourself or with the help of your IT professional.

DenatlEyepad is available at various dental depots.

New VisiQuick dealers in Belgium and Denmark

We are pleased to announce that our dealer network is expanding further.

In Denmark there are two new VisiQuick dealers: Nordenta AS, and Dent Support.

In Belgium DK Medical has become a dealer of VisiQuick working closely with Kerckaert & Laboror.

All VisiQuick dealers are able to carry out the entire process of training, installation and support of VisiQuick. This applies not only to new but also to existing users of VisiQuick.

VisiQuick the best solution in the cloud or in your local network

VisiQuick is the best solution for working with your x-ray equipment from the cloud or in a local network. In both configurations VisiQuick proves to be a robust solution. Also in the cloud all devices supported and you can work with terminal server, citrix or other cloud solutions from your own IT provider.

Where other solutions require large local investments, VisiQuick can run your practice from the cloud without having to maintain a growing complex and expensive IT environment locally.

From large dentist chains to smaller practices from 3 workplaces, this way of working proves to be very beneficial, maintaining the quality and speed of your way of working. By turning in the cloud you will realize lower costs for IT and software.

For more information, please contact contact us.

VisiQuick announcement Nordental 2017 in Lillestrom

From 2 to 4 November, VisiQuick will be present at Nordental in Lillestrøm. We can be found at the stand of Dental Sør on B2-18. We hope to welcome you there, where we will be presenting the latest version of VisiQuick 777 CE.

Dental Sør and VisiQuick have a special offer for new and existing customers during the fair. Now it’s time to switch to VisiQuick: the most simple, safest and fastest program for all your X-ray and other images, connected to all X-ray equipment. Also, we offer special action rates to convert your old database(s), such as Romexis, Digora, Onepix, Kodak and many others to just one database in VisiQuick.

Copy directly from VisiQuick to Invisalign

The Invisalign treatment with tailor-made transparent aligners is being used in more and more clinics in addition to existing techniques. From version VisiQuick version 777, it is possible to copy your images directly from VisiQuick to the Invisalign web portal.

You can simply drag the photo from VisiQuick to Invisalign. Click on the top left corner of a photo, hold down the mouse and drag the photo to the desired position in Invisalign.

VisiQuick CE

VisiQuick version 3.0.1.777 is CE certified. This complies with European regulations for (x-ray) image processing programs. This obligation applies to all image processing programs and not just only VisiQuick.

You can see in the help screen of your program whether it is CE certified or not. If you do not see a CE logo then contact us to inform you for upgrading or transfer to VisiQuick.

All customers with an active (non-expired) license can use as usual the latest version. For customers with no longer active (expired) licenses and new customers, an action has been initiated to start working with VisiQuick CE.

With this action VisiQuick becomes by far the cheapest program for (x-ray) image processing software.

VisiQuick: Most Used, Highest Rated, Fast and Safe!

Please respond here through our contact form.